Problems in the production of silicone face brushes and how to deal with them

Kangde Silicone Jun 07, 2022 Industry News
Silicone Cleansing Brush, Silicone Products Manufacturer, Silicone Products Wholesale
Many silicone product manufacturers know that the brush head of the silicone cleaning brush is the core of the production difficulty. It is different from the fiber brush in that each brush head is formed by a finishing mold and then vulcanized at high temperature to obtain the entire facial brush. It has the characteristics of strong toughness and soft rebound. Today, Ruibo Rubber will talk about the difficulties and skills of silicone cleansing brushes.
Difficulties in the production of silicone cleansing brushes:
1. Difficulty in mold design:
In the production process, because the brush heads on the entire face are denser, and there is a suction cup on the back of the product, the mold design is more difficult.
2. Demoulding is easy to cause defects;
Each product needs to be pulled by hand to be released from the mold, so it is inevitable that the brush head on the face and the suction cup at the bottom will be damaged.
The second is that the diameter of the brush head is less than 0.8mm and less than 1mm, and the distance between the brushes is too narrow, so the brush head will wind and break during production.
The method of the common problems of the silicone cleansing brush:
1. In many cases, the reasons for the failure are also different in terms of skills. Therefore, when pulling, it is easy to be pulled off, and the staff should pay attention to using appropriate strength. Since the mold core of the silicone cleansing brush shuttles in the middle of the cleansing brush, so Forced pulling will cause the product base to break,
2. Secondly, try to slow down the speed of mold ejection so as not to let the brush head break in the mold, because the brush head is too thin and broken, and it is impossible to see whether it is broken with the naked eye, and it is often ignored in the case of neglect. There are several hours or even a day of bad phenomena in a row, so when the mold is released, it is necessary to carefully check whether the brush head is complete after the mold is released.
3. For the brush head air wrapping phenomenon, as long as it is within a certain temperature and time, it will basically not occur, but the operation speed is too slow after the mold is released, and the air wrapping phenomenon will easily occur.

FAQ:

(1) What is the MOQ for this product?
-- For ready mold, the MOQ is 500Sets; for new moulding, should be negotiated.
(2) Can I have my own design idea to you and your designer help to design?
-- Yes, we have our own designer, can help you for design from ideas to products.
(3) Can I design my own colors?
-- Yes, you can choose any colors from Pantone.
(4) Can I make own logo on the prduct?
-- Yes, we can make your own logo on the product by screen printing or engraving logo on the product.
(5) How is the product packed?
-- Usually will come in our normal packaging: each into a polybag . But we can als custom your own packaging.
(6) Do your products reach the Europe, North America or Japan quality standard?
-- Yes, they are compliant with LFGB, FDA and CE certificates, so we definitely can meet your market standard.
(7) How about the delivery time?
-- Within 3-7 workdays for normal orders. OEM and Big orders will depend on production time.
(8) How to contact you?
-- Click send email to sales@kangdesilicone.com, you can send email inquiry Or leave your message in the form below.

Pre: Are silicone table mats safe and reliable? Will it rot when heated?
Next: The reason why the surface of silicone products is not smooth

You may also like

Leave Your Message

Send Inquiry Now

If you have any enquiry, please feel free to email us at sales@kangdesilicone.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

sales@kangdesilicone.com 8618718776708 +86-752-3732286